To RBWH
7:18 pm
- 7:28 pm
- 7:38 pm
- 7:48 pm
- 7:58 pm
at Mater Hill station, platform 1
BRISBANE METRO · SOUTH EAST QUEENSLAND
M2RBWH ↔ to UQ Lakes via City
Brisbane Metro M2 runs between RBWH and UQ Lakes via City. On weekdays the first service leaves around 4:39 am and the last around 12:20 am, with a service every 5 min at peak.
- Every 5 minat weekday peak
- 4:39 amfirst, weekdays
- 12:20 amlast, weekdays
- 25 minend to end
YOUR ROUTE
Can I catch this?
Enter an address or suburb to check how close the M2 comes to you.
Walking time is an estimate from distance, not a route on foot. GoSEQ doesn’t save your search.
Know exactly when to leave: get the free appNowService alerts
- PA Hospital and Buranda station - late night stop changes
From 8pm until last service on Tuesday 27 October, there will be stop changes at PA Hospital and Buranda busway stations due to essential tunnel maintenance works. During this time, buses will use the following alternative stops shown below. Buranda busway station will remain ope
- Roadworks: Road construction (reported)
From TransLink’s service alerts, as of now. Crashes, closures and roadworks marked “reported” come from HERE’s traffic feed (© HERE) and may be out of date.
Next departures
TimetableTo UQ Lakes
7:24 pm
- 7:34 pm
- 7:44 pm
- 7:54 pm
- 8:04 pm
at Mater Hill station, platform 2
Timetable times at a stop in the middle of the route, not live. For your own stop, pick it under Stops; for live times, open GoSEQ.
How often it runs
Timetable| When | To RBWH | To UQ Lakes |
|---|---|---|
| Peakweekdays, 7–9 am and 4–6 pm | every 5 min | every 5 min |
| Off-peakweekdays, 9 am–3 pm | every 5 min | every 5 min |
| Saturday8 am–6 pm | every 10 min | every 10 min |
| Sunday8 am–6 pm | every 10 min | every 10 min |
| First service | 4:39 am | 5:21 am |
| Last service | 11:39 pm | 12:20 am |
| End to end | 25 min · 12 stops | 23 min · 12 stops |
| Services a dayweekdays | 184 | 182 |
Services each hour to RBWH
Weekdays184 a day
Saturday126 a day
Sunday120 a day
A typical day in the timetable, at Mater Hill station, platform 1. Shaded: weekday peak.
Stops
Tap a stop for its next departuresTo RBWH12 stops · about 25 min
- UQ Lakes stop A+6 buses
- Boggo Road+15 buses
- PA Hospital+14 buses
- Mater HillM1+30 buses
- South Bank buswayM1+32 buses
- Cultural CentreM1+44 buses
- King George Square, 1cM1+6 buses
- Roma Street buswayM1+39 buses
- Normanby+22 buses
- QUT Kelvin Grove+14 buses
- Herston+14 buses
- RBWH+22 buses
Questions
Is the M2 running today?
Yes. The M2 is in today’s timetable (Tuesday). For live times, delays and cancellations, open GoSEQ: it shows where each bus is right now.
How often does the M2 run?
Towards RBWH, it runs every 5 min at weekday peak, every 5 min in the middle of a weekday, every 10 min on Saturdays, every 10 min on Sundays, by the timetable.
What time is the first and last M2?
On weekdays, the first service towards RBWH leaves Mater Hill station, platform 1 at about 4:39 am and the last at about 11:39 pm.
Where does the M2 go?
Brisbane Metro M2 runs between RBWH and UQ Lakes via City. End to end takes about 25 minutes, with 12 stops each way.
Can I see where the M2 is right now?
Yes, in GoSEQ. This page shows TransLink’s timetable; the app adds live positions, a countdown to your bus, delays and an alert before your stop.
GOSEQ
Never miss the M2 again.
Know when to leave, see where your bus is right now, and get a nudge before your stop.
Open in GoSEQ